Just launched Filter Forge 3.app on Mac OS X 10.7.2 and got the following crash:
Looks like you're over-releasing an object. Use either [object release] or CFRelease(object), but not both:
Model: MacPro4,1, BootROM MP41.0081.B07, 8 processors, Quad-Core Intel Xeon, 2.66 GHz, 8 GB, SMC 1.39f5
Graphics: NVIDIA GeForce GTX 285, NVIDIA GeForce GTX 285, PCIe, 1024 MB
Graphics: NVIDIA GeForce GT 120, NVIDIA GeForce GT 120, PCIe, 512 MB
Memory Module: DIMM 1, 2 GB, DDR3 ECC, 1066 MHz, 0x802C, 0x31384A53463235363732415A2D3147314431
Memory Module: DIMM 2, 2 GB, DDR3 ECC, 1066 MHz, 0x802C, 0x31384A53463235363732415A2D3147314431
Memory Module: DIMM 5, 2 GB, DDR3 ECC, 1066 MHz, 0x802C, 0x31384A53463235363732415A2D3147314431
Memory Module: DIMM 6, 2 GB, DDR3 ECC, 1066 MHz, 0x802C, 0x31384A53463235363732415A2D3147314431
Bluetooth: Version 4.0.1f4, 2 service, 18 devices, 1 incoming serial ports
Network Service: Ethernet 1, Ethernet, en0
PCI Card: NVIDIA GeForce GTX 285, sppci_displaycontroller, Slot-1
PCI Card: NVIDIA GeForce GT 120, sppci_displaycontroller, Slot-2
Serial ATA Device: HL-DT-ST DVD-RW GH41N
Serial ATA Device: WDC WD6400AAKS-41H2B0, 640.14 GB
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: ST31000333AS, 1 TB
Serial ATA Device: WDC WD1001FALS-00J7B0, 1 TB
Serial ATA Device: WDC WD1001FALS-00J7B1, 1 TB
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfa200000 / 2
USB Device: G500, 0x046d (Logitech Inc.), 0xc068, 0xfa230000 / 4
USB Device: Apple Keyboard, apple_vendor_id, 0x0220, 0xfa220000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: ET-0405A-UV2.0-3, 0x056a (WACOM Co., Ltd.), 0x0011, 0xfd130000 / 3
USB Device: DeskJet 1220C, 0x03f0 (Hewlett Packard), 0x0212, 0x3d100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x5a100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x5a110000 / 4
USB Device: Logitech G330 Headset, 0x046d (Logitech Inc.), 0x0a17, 0x3a200000 / 2
FireWire Device: built-in_hub, 800mbit_speed
|Posted: November 6, 2011 1:08 am|
|ya, same here. Mac Pro 2010 OS X 10.7.2|
|Posted: November 9, 2011 8:26 pm|
Crashing when I try to edit a filter.
Jim in Atlanta, GA
|Posted: November 10, 2011 12:04 am|
My FF crashes regularly while editing filters.. To the point that i cannot use it
|Posted: December 27, 2011 4:32 pm|
|Mark Douma, could you please provide the filter that causes this crash.|
|Posted: December 28, 2011 3:34 am|
GMM: Sorry for the delay.
I'm trying to remember back now, but I believe the crash I got in the original post happened while trying to launch Filter Forge for the very first time. In other words, I believe FF crashed almost immediately. I then tried to launch it again and this time it worked perfectly fine (go figure).
|Posted: January 7, 2012 12:43 pm|
@ angelboiii: I can save the same thing, cannot use 3.0, crashes with a 3 minute interval when just connecting components.
There is a reason I'm not making any cool FF3 filters, it's just impossible to work with at as it's very unstable.
- I never expected the Spanish inquisition
|Posted: January 14, 2012 4:08 pm|
Filter Forge has a thriving, vibrant, knowledgeable user community. Feel free to join us and have fun!
15,377 Registered Users
+6 new last day!
+90 new in 7 days!
+16 new in 7 days!
9 unregistered users.