IKS-Pattern-14 by jhantares

How to use this filter

The source image is connected to a Switch, Pavement, Elevation Gradient and Bricks component. Using sliders you can alter the generated pattern.
See following lines on how to alter patterns from connected sliders.

Component shortcuts

K1 - K2 -> Kaleidoscope
GR -> Gradient sliders
NO -> Noise Distortion
M1 -> Map script
TR -> Stairs component


Uncheck "Image/Pattern" and set switch "SW-1(4)" to 1 and uncheck "Pattern/Map"
Use following sliders to alter pattern: "K2"

Uncheck "Image/Pattern" and set switch "SW-1(4)" to 1 and check "Pattern/Map"
Use following sliders to alter pattern: "M1", "K2"

Set switch "SW-1(4)" to 2 and uncheck "Pattern/Map"
Use following sliders to alter pattern: "GR", "NO", "TR", "K1", "K2"

Set switch "SW-1(4)" to 2 and check "Pattern/Map"
Use following sliders to alter pattern: "GR", "NO", "TR", "K1", "M1", "K2"

Set switch "SW-1(4)" to 3 and uncheck "Pattern/Map"
Use following sliders to alter pattern: "GR", "NO", "TR", "K2"

Set switch "SW-1(4)" to 3 and check "Pattern/Map"
Use following sliders to alter pattern: "GR", "NO", "TR", "M1", "K2"

Set switch "SW-1(4)" to 4 and uncheck "Pattern/Map"
Use following sliders to alter pattern: "NO", "K1, "K2"

Set switch "SW-1(4)" to 4 and check "Pattern/Map"
Use following sliders to alter pattern: "NO", "K1, "M1", "K2"

All patterns can be altered by "Reflectivity","Reflection Blur" and "Metallic"

Have fun to explore the capabilities of this filter!